iFlight Chimera7 Pro V2 DJI O3 - 6S BNF

iFlight Chimera7 Pro V2 DJI O3 is the ultimate drone for long-range flying or carrying heavier HD cameras like the Sony ZV-E10. The Chimera7 Pro V2 is designed for 7.5" propellers that are powered by XING2 2809 motors. As a result, it has higher thrust than conventional 7" copters and can carry a larger and heavier battery or camera. The drone body is long enough so that the top plate can comfortably accommodate a camera and longer battery. 

The copter features plastic covers to keep sensitive electronics protected from debris, but still maintains airflow for cooling. The sides also contain LEDs for a unique look. The XT60 connector is hardmounted in a 3D printed piece in the back of the drone. This prevents the battery cables from sticking where they shouldn't and doesn't cut the propeller. The drone also includes an anti-spark filter. A small component that eliminates the spark skipping in the connector when the battery is plugged in. This causes less wear on the connector and extends its life. 

The heart of the drone is the iFlight Blitz F722 flight controller combined with the iFlight Blitz E55 ESCs. The propulsion is provided by the XING2 2809 1250Kv motors and HQ 7.5" propellers. The drone is already equipped with GPS. In the goggles, you can see information such as speed, distance from the home point, total distance and direction to the home point. Betaflight also supports return to home feature in case of signal loss or by instruction on the radio.

The video transmission is handled by the DJI O3 system, which is the absolute top of the line in FPV. DJI O3 unit is equipped with additional heat sink for better heat dissipation. The O3 camera in turn is housed in silicone inserts that dampen vibration for clear video.

The drone comes without a receiver (RC signal from the DJI O3), choose the one according to your radio. Recommended batteries are 6S Lipo with 2000-4500mAh capacity or Liion 21700 6S1P-6S2P packs.