Walksnail Avatar GT Kit

Avatar GT Kit is a combination of camera, video transmitter and antenna for the Walksnail Avatar digital system. The Walksnail Avatar enables video transmission in full HD (1080p) or HD (720p) quality with low latency of even 22ms and high refresh rate of 60/120fps and data throughput of 25/50mbps. The Walksnail Avatar system supports Canvas mode, where you can render a classic full OSD into the image, just like you're used to in the analog world.

Walksnail Avatar GT stands out especially with its high transmit power of up to 2W. The transmit module uses two LHCP antennas connected via u.FL connector. The transmitter has a slot for a SD card of up to 256GB, which can be loaded with camera images. The transmitter module also includes active cooling. In addition to the image, the camera also records gyro data, which makes it easy to stabilize the image in Gyroflow. For easy installation in the drone, the video transmitter has holes with 25.5x25.5mm as well as 20x20mm M2. The camera is micro size. It is connected to the video transmitter by a 14cm cable. The aspect ratio is switchable 4:3/16:9. The lens used is M12 2.1mm.

The Avatar GT Kit uses a pro camera. It excels primarily due to the large 1/1.8" sensor of the Sony Starvis II, which is suitable for flying at night and in poor lighting conditions. 

The video transmitter can be powered by 11-25V (3-6S). When directly powering 6S batteries, a capacitor of at least 470uF/50V should be used at the input. 

Manual