ToolkitRC M9 600W

ToolkitRC M9 is a powerful charger without integrated power supply. The charger can charge with up to 600W per channel. The M9 can charge Lithium batteries up to 8S.The charger has both input and output XT60 connector so that standard Lipo batteries can be connected without the need for an adapter. Setup of the charger is done via the roller. All charging information is displayed on the flip-out IPS display with a size of 2.4" and a resolution of 320x240 pixels. The ToolkitRC M9 also features USB-C and USB-A connectors with up to 65W of power. Efficient cooling is provided by a fan. The Power function is also supported, where the charger serves as an adjustable voltage source with current limiter. This feature can also be used when the drone is plugged in for the first time, replacing the smoke stopper.

The M9 supports discharging in Recycle and External modes. In recycle mode, the discharged battery is discharged back into the power supply. This comes in especially handy when you use a larger Liion battery or car battery as the power supply. In external mode, you connect the discharging battery as a voltage source and connect a load (typically a resistor) to the battery output to discharge the battery.

ToolkitRC M9 is not just a charger, but a universal tool. It can measure voltage, internal resistance, and RC signals - PWM, PPM and SBUS. It also serves as a servo tester with PMW, PPM and SBUS output. The M9 has an SD card slot. This is used for firmware updates and uploading custom audio tracks.

Manual