Rotorama Spectre

Rotorama Spectre is a freestyle frame created with a clear goal: to provide great flying characteristics thanks to a suitably distributed weight and ensure good frame resistance and component protection. The frame is designed with split arms of the highest quality carbon which we have carefully chosen. The arms and the bottom plate are made of 4mm carbon, sides of 3mm carbon, and the top of a 2mm one. The weight of the frame is 133 grams in the 6" design, which is more than acceptable acceptable for freestyle flying.

The basic shape of the copter is true X: the distance between the front and rear motors is the same as between the left and right ones. The battery is secured on the top plate by two lipo straps. The behavior of the copter is very predictable because the weight is centered near the center of gravity and the center of gravity is in turn close to the thrust point.

The arms are separable and easily replaceable. When an arm breaks during a really tough crash, it is sufficient to undo a few bolts and the arm can be freely pulled out and replaced with another one. You can be back in the air in a few minutes. The arms are designed so that their base is wide enough to accommodate standard 30A ESCs. Of course, 4in1 controllers can also be used.

Inside, all standard controllers and all-in-one controllers with 30.5mm mounting distance (SP Racing F3, Omnibus F3 / F4, BetaflightF3, Mateb PDB, Racerstar 4in1 ESC, ...) can be fitted. Camera mount supports standard full size cameras such as Foxeer Predator or Runcam Swift.

A durable and flexible TPU bracket for a HD camera is included. In addition to the popular Gopro Session, any other HD camera can be attached. The VTX antenna bracket is also made of a flexible TPU, which reduces damage to the antenna during crashes.

The frame is shipped with standard 6" arms and 5" and 7" arms can also be purchased separately.