iFlight Evoque F5D V2 O3 - 6S PNP

The iFlight Nazgul Evoque F5D V2 is a top-of-the-line freestyle five-inch drone designed for flying outdoors just for fun or for capturing action shots. The Evoque is equipped with DJI O3 FPV transmission, which is among the best. DJI O3, in addition to image transmission in HD quality, long range and low latency, also supports recording in 4K directly on board the drone. For the more demanding video creators, the Evoque can easily carry a GoPro 11. Compared to other FPV drones, the copter has an interesting design. The center of the drone with electronics is protected by plastic sides. There are light strips in the sides and on the bottom of the arms, which give the drone a unique look. The XT60 connector is firmly attached to the back of the copter. The battery cables do not have a chance to get tangled in the propellers.

We deliver the iFlight Evoque copter in the F5D design - for 5" propellers with Deadcat arms. With the Deadcat arm distribution, the front arms are moved backwards and to the sides. Thanks to this, the propellers are not visible in the image. Not only does it not disturb the pilot while flying, but above all it does not spoil the 4K recording taken with a DJI O3 unit.

The base of the copter is the iFlight Blitz F7 Mini stack. FC with powerful F722 processor, 16MB memory for blackbox, barometer for height measurement and BMI270 gyro. The second part of the stack consists of a ESC with modern BlHeli_32 firmware. The latter can be powered by a 2-6S battery and supports a current of 55A. The FC also includes a current sensor. The copter is powered by iFlight Xing2 2207 motors. The aforementioned DJI O3 unit takes care of video transmission. Recommended batteries are 6S with a capacity of 1300-1500mAh.

For maximum reliability, the DJI O3 is equipped with an iFlight cooler for good heat dissipation even at high performance. The drone also uses Anti-spark. This prevents the spark from jumping when connecting the battery during charging of the capacitors and increases the life of the connectors.

We deliver the copter in the PNP variant - without receiver. Choose it according to your RC radio.