iFlight BLITZ Wing H743 is a flight controller designed for use in FPV airplanes. The board uses the powerful STM32H743 processor that supports Betaflight , iNav and the more advanced Ardupilot firmware. BLITZ Wing H743 consists of two boards. The bottom board is the distribution board for battery power. It includes pads for soldering 5 ESCs, a switchable 5-8.4V 6A BEC for the servos, a 5V BEC and a 9V BEC for the flight controller and other electronics. The board also includes a current sensor. The upper board takes care of flight control. It includes the aforementioned H743 processor complemented by a gyro ICM42688P, a barometer DPS310, an OSD chip and a SD card slot for storing Blackbox data. The board has 8 UARTs, 2x I2C bus and CAN bus. The board also allows the connection of two analog cameras, which can be switched between. The board has mounting holes of standard size 30.5x30.5mm.
Key Features
- Input Voltage: 7-36V (2-8S)
- MCU: STM32H743
- Gyro: ICM42688P
- Baro: DPS310
- OSD: AT7456E
- BlackBox: MicroSD card
- Number of UARTs: 8
- Bus: I2C, CAN
- Two cameras possible
- Switchable 5V/7.4V/8. 4V outputs
- BEC: 5V 2.5A / 9V 2.5A / 5-8.4V 6A
- Mounting holes.9*52mm
- Weight: 35g
- Firmware target: Betaflight, iNav, Ardupilot
Package Includes
- 1x Flight controller
- 1x Softmount Set
- 1x Cable Set
