Emax Tinyhawk II Indoor RTF

Discontinued
€ 242,26

Emax Tinyhawk II Indoor RTF is a complete set of small drone, FPV googles, RC, chargers and other necessities packed in a practical case.Drone is suitable inside or in the garden for beginners and advanced pilots. Emax Tinyhawk II is already the second version and contains several improvements. Basically, the Tinyhawk has a great Runcam Nano 2 camera, which in combination with a video transmitter with a power of up to 200mW will take care of quality video. Another big plus is the adjustable camera angle, which you can change depending on your abilities and the environment in which you fly. Another plus is the control unit. The board uses Betaflight, has an F4 processor, 5A BlHeli_S controllers and an integrated receiver for Frsky D8. There are UARTs for connecting an external receiver. Tinyhawk uses 0802 motors in a push arrangement. The motors are therefore well covered from above by the frame and have better efficiency. The frame itself is made of soft and durable plastic, which springs in the event of an impact and does not break. A nice bonus is the installed LED strips. The helicopter supports either a 1S 450mAh battery suitable for indoor flying or a 2S 300mAh battery suitable for outdoor.

The Emax Transporter FPV box goggles are relatively well equipped for their price category. They support 48 channels and can be used with all analog racing drones. They have a sliding lens, so you can focus better and regulate the size of the image. The advantage is the built-in fan, which prevents fogging of the display. The googles are also equipped with a receiver with diversity, thanks to which they select the better signal from two antennas. The glasses are powered by an external 1S battery, which can be charged via USB. The googles are thus lighter and more comfortable. The only possible disadvantage is the absence of recording.
Emax E6 is a basic eight-channel transmitter using the Frsky D8 protocol. The transmitter is powered by one Liion 18650 battery, which is charged via a USB connector.
Manual is here.

Key Features

  • Diagonal distance between motors: 75mm
  • Weight without battery: 31.2g
  • Weight with 1S 450mah: 43.5g
  • Engines: 0802 16000Kv
  • Propeller: Avan Turtlemode 4-blade 40mm
  • FC: F4 (MatekF411Rx Firmware)
  • ESC: 5A BlHeli_S
  • Receiver: Frsky F8 / external
  • FPV Camera: Runcam Nano 2
  • Video transmitter power: 25/100 / 200mW - switchable
  • Display size: 4.3 "
  • Display resolution: 480x320px
  • Diversity income
  • Built-in fan
  • Sliding lens
  • External 1800mAh 1S battery

Package Includes

  • 1x Tinyhawk II
  • 1x FPV glasses
  • 1x Battery for glasses
  • 1x Radio
  • 1x Emax 450mAh 1S HV Battery
  • 1x Emax 300mAh 2S HV Battery
  • 1x Set of spare propellers
  • 1x USB charger
  • 1x Screwdriver and accessories
  • 1x USB cable for charging
  • 1x Case

Videos